Robin CycBar 15
14
VhI.c.
---
White counting.
If this function is on, the white LED of each pixel lights when a white colour is mixed.
The light intensity of the white LED is in a proportion to the intensity of the rest of pixel´s LEDs (red, Green, blue)
and improves the white output of the pixel. The function influences “pixel modes” only - DMX mode 3 and 4
(RGBW colour mixing mode has to be set).
tnP.u.
---
Temperature unit.
Use this menu in order to display the fixture temperatures in desired units: °C or °F.
In.Po.
---
Init effect positions.
Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (if DMX is not receiving).
oFrE.
---
LEDs output frequency.
The function allows you to select PWM (Pulse Width Modulation) output
frequency of LEDs from the two frequencies: StAn (Standard=300Hz)
HiGh (High=1200Hz)
FrEq.
---
LEDs output frequency adjustment.
The function allows you to change the selected PWM (Pulse Width
Modulation) output frequency of LEDs in 18 levels up and down around the selected frequency in the menu “oFrE”.
-18...-01
--- Frequence levels 1-18 under selected frequency.
00
--- Selected frequency (Standard or High)
+01...+18
--- Frequence levels 1-18 above selected frequency.
dF.SE.
---
Default Settings .
The menu item sets all fixture parameters to the default (factory) values.
6.4 Manual mode
Use this menu to control all channels via buttons of the control board.
Items in this menu depend on selected DMX mode.
To control fixture channels.
1.
Use the UP/DOWN buttons to find “ Man.C“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“Func.” –
a Special functions channel
“rEd.A” – a red LEDs saturation coarse
“rE.A.F” – a red LEDs saturation fine
“GrE.A” – a green LEDs saturation coarse
“Gr.A.F” – a green LEDs saturation fine
“bLU.A” – a blue LEDs saturation coarse
“bL.A.F” – a blue LEDs saturation fine
“VhI.A” – a white LEDs saturation coarse
“Vh.A.F” – a white LEDs saturation fine
“Cto” – a colour temperature correction
“Vir.C.” – a virtual colour wheel
“PiH.E.” – pixel effects
“PH.E.S.” – a pixel effects speed
“Stro.“ - a strobe/shutter
“dinr“ - a coarse dimmer
“F.dim” a fine dimmer
“rEd.I” a red LED 1
:
“bL.15” a blue LED 15
4.
Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.
