Robe BMFL Robin Spot Woreless DMX CRMX User Manual Download Page 33

Page: 33 / 57

Information icons

- Air Filters Cleaning

This icon signalizes that cleaning period of the air filters has elapsed

and you have to clear air filters and reset the menu item "Elapsed Time".

- Lamp time - 250 hours remaining

This icon signalizes that 50 hours remain before replacing the lamp.

- Lamp time - 50 hours remaining

This icon signalizes that 50 hours remain before replacing the lamp.

Errors

Error in the fixture is signalled by the yellow warning icon at the bottom line of the screen:

Touch the warning icon or press the [ESCAPE] button to display error messages.

List of error and information messages:

Active Lamp Timer

This message appears if you try to switch on the hot lamp. The fixture tries to ignite the lamp and during time

period before next attempt of the lamp ignation the message is displayed. Also faulty (missing) lamp can be

reason of the message.

Lamp Error

This message appears if the lamp was switched off without command of the lamp control software.

Overheated

This message informs that the fixture head has been overheated and the lamp was switched off by means of

the head temperature sensor (sensor Head Temperature). Before switching the lamp on again, the fixture must

be disconnected from mains and connected once again.

Base Overheated

This message informs that the fixture base has been overheated and the lamp was switched off by means of

the temperature sensor (sensor Ambient Temperature) in the base.

Temper.Sensor Error

The message informs you that the communication between the temperature sensor in the fixture head and its

processor failed and the lamp has been switched off.

Tilt Error 1 (Tilt Error 2)

This message will appear after the reset of the fixture if the head´s magnetic-indexing circuit malfunctions (sen

sor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The head is not

located in the default position after the reset.

Tilt Error 3

Summary of Contents for BMFL Robin Spot Woreless DMX CRMX


























































Search results

Summary of Contents for BMFL Robin Spot Woreless DMX CRMX

Reviews:

Related manuals for BMFL Robin Spot Woreless DMX CRMX

Brands by name

Popular brands

Robe BMFL Robin Spot Woreless DMX CRMX, User Manual

Search results

Summary of Contents for BMFL Robin Spot Woreless DMX CRMX

Reviews:

Related manuals for BMFL Robin Spot Woreless DMX CRMX

Brands by name

Popular brands