background image

Special  gas  hose  (e.g.,  high-quality  composite  or  NBR  hose)  must  be  used  for  the 
connection  between  the  gas  stove  and  the  gas  source.  Using  hose  that  is  made  of 
common rubber material is strictly prohibited as such hose will react with ozone and LPG 
and causes gas leakage, fire disaster and other dangers due to aging and cracking. 

Special gas hose must be used for the connection with gas source and it shall be replaced 
at least once a year. The hose shall have a length around 1~1.5 m with no rigid bending 
and  flattening.  Using  defected  or  aged  hose  is  strictly  prohibited.  The  joint  of  the  hose 
shall be checked for firmness and reliability. The joint shall be secured with clamps, so as 
to avoid gas poisoning, fire disaster and other dangers due to gas leakage.

If 

G1/2

'  interface  is  adopted,  the  joint  of  the 

φ9.5  hose  must  be  screwed  off,  a  rubber 

washer  shall  be  applied  on  the  interface  and  the  nut  shall  be  screwed  down. After  tha

t, 

leakage detection shall be carried out before using. 

1

Gas Hob

   In order to avoid any harm or property damage to the users and other persons, following distinctions and 
signs are specially given. 
     All  these  are  the  important  notices  concerned  with  safety,  so  please  abide  by  these  notices  strictly. And, 
please use this product correctly on the premise that all the contents herein are understood fully. 

Distinctions on contents made in accordance with extent of harm and damage

Danger

Notice

Warning

Personal  risk,  serious  injury  or  a  fire  may  be  very  likely  caused  if  this  sign  is 
neglected and the product

 

is

 

operated

 

improperly

Personal risk, serious injury or a fire may be caused if this sign is neglected and the 
product is operated improperly. 

Personal  injury  or  damage  to  objects  may  be  caused  if  this  sign  is  neglected  and 
the product is operated improperly. 

Signs of the behaviors that shall be paid attention to or that shall be prohibited

Warning

Please  use  this  product  strictly  in  accordance  with  contents  of  this  Operation  Manual. 
Our company is not reliable for any property loss or personal injury caused by improper 
using of this product.

Prohibited

No touch

No remove

Abide by strictly

Safety Precautions

Hot surface

Abide by 

strictly

Abide by 

strictly

Abide by 

strictly

Danger

Dear users:

Switch

Pan

 

Stand

Copper

 

Core

Copper

 

Cover

Aluminum Base

Electrode

 

Needle

Thermocouple

Burner

water pan

1

2

3

Summary of Contents for JZT-B920












Reviews: