Prohibited
Do not use baffler to cover the flame. Putting inflammables around stove and drying
towels, clothes, etc. with stove are not allowed.
During ignition, please keep head away from the burner. After using, please close the
valve of the gas source and the switch knob of the gas stove, so as to avoid the
occurrence of accident.
The cupboard where an embedded gas stove is going to be installed shall have an
atmosphere-connected opening that satisfies ventilation requirements (with an area no
2
less than 100 cm ), so as to avoid explosion caused by deposited leaked gas.
Please do not turn on the stove without putting any pot or use it to heat any empty pot, as
such operation may damage the extractor hood due to excessive heating or ignite the
greases on extractor hood and cause fire disaster.
During and short after using, please do not touch areas like pot rack, burner cap and
stove panel as they are still hot.
2
If special gas hose is adopted, one end of the hose shall be connected with the valve of
gas source and the other end shall be connected with the gas inlet of the gas stove (Note:
Please remove the protective cap on the joint). The hose ends shall cover the red marks
and secured by the clamps provided randomly. In the meantime, leakage detection shall
be carried out to make sure there is no leakage. After that, the product can be used.
If gas leakage is observed, the valve of the gas source shall be closed immediately and
window shall be opened for ventilation. Exhausting gas with electric fan, extractor hood or
other electric appliances is not allowed. Do not operate the switch of any electric
appliance and no fire is allowed. In the meantime, please contact the after-sales service
of the local branch.
Gas Hob
If anti-drop metal hose is adopted, the hose must be installed as per the methods and
steps specified in the operation instruction in the package of the hose strictly (by the
professional staff of the Company) and leakage detection must be carried out (See the
methods above).
Danger
No touch
Prohibited
Abide by
strictly
Abide by
strictly
Abide by
strictly
Abide by
strictly
Abide by
strictly
Do not screw the hold-down nut at the joint of the gas inlet without permission. If the nut is
screwed for wrong joint direction, leakage detection must be carried out at the site
(Methods: Apply a thin layer of neutral cleaning solution on the joint and open the valve of
gas source to heck if there is any bubble. If bubble is observed, close the valve and screw
down the nut. Carry out leakage detection again to make sure there is no leakage. After
that, the product can be used.)
Abide by
strictly
Switch
Pan
Stand
Copper
Core
Copper
Cover
Aluminum Base
Electrode
Needle
Thermocouple
Burner
water pan
图
1
图
2
图
3
