MICON 500C Electronic Sequencing
23
234AY00.INS R06
Computer Installation Guide
6.3.3
MAKING DISCOUNT PRICE SALES ON A TWO TIER DISPENSER (CONT’D)
The INFO-PAC used to monitor and program the MICON 500C pumpheads has a
setting intended for use when two tier (regular and discount) pricing is in effect:
PRC RESTORE (price restore). When this setting is ON (default setting), the
MICON automatically reverts back to tier 1 (regular pricing) after each
discounted transaction.
It is possible to set PRC RESTORE OFF, in which case the price used for the
current sale is retained for the next sale. Refer to INFO-PAC MICON 500C
Programming Manual for details.
6.3.4 READING TOTALIZERS ON A TWO TIER DISPENSER
(FOR SINGLE TIER TOTALIZER READING, GO TO PAGE 18.)
Reading volume and dollar totals on two tier dispenser totalizers is the same as on single tier
dispensers totalizers, except that pressing the
DISCOUNT
button will change which volume/dollar
setting (regular or discount) is being read.
The two tier dispenser contains two sets of totalizers:
Ø
volume and dollar totals for
regular
priced sales;
Ø
volume and dollar totals for the
discount
priced sales.
To read the totalizers:
1. Proceed as on page 18 by turning OFF AC MICON 500C head power at breaker box.
Display should be flashing. Aim the communicator’s transmitter (on top of unit) at the optical
sensor (oval hole ) at right of price display on MICON 500C. Press and hold the
SEL key until the dollar sales total is displayed.
2. Display will show “d
I
” for regular dollar totals. Press the DISCOUNT button. Display will
show “d
I
I
” for discount dollar totals.
3. Press the SEL key until the display shows “v
I
” (regular priced volume total) or “v
I
I
”
(discount priced volume total). Press the DISCOUNT button to switch back and forth
between “v
I
” and “v
I
I
”.
4. Press and hold the SEL to switch back and forth between dollar and volume total displays.
NOTE
