MICON 500C Electronic Sequencing
5
234AY00.INS R06
Computer Installation Guide
TABLE 1 – ACCESSORY / OPTIONAL PARTS - KRAUS
2.0
PRE-INSTALLATION CHECK (CONT’D)
d) When INFO-PAC has received a copy of the MICON 500C setup information correctly,
INFO-PAC display will show “Received Micon”. To view each setting, scroll with the up
or down arrow key. (Default settings are summarized in Table 6 and 7, pages 25, 26.)
4. Enter a price. See section 6.2.2 – Setting Prices, page 19 for a description of the
procedure. Price
reading
is also described in section 6.2.1 – Reading Totalizers, page 18.
Setting prices and reading totalizers on two tier dispensers is described on pages 22 and
23, sections 6.3.3 and 6.3.4.
For a detailed explanation of INFO-PAC operation, see INFO-PAC MICON 500C Programming
Manual.
If any faults are detected during this preliminary check, consult your factory or service
representative.
3.0 PHYSICAL MOUNTING CONSIDERATIONS
Kraus Group Inc. is presently offering accessory parts to facilitate the field installation of the MICON
500C into various dispensers. These accessory parts, listed in Table 1 below, must be ordered
separately. Consult your service representative.
PART NO. ACCESSORY / OPTIONAL PARTS - KRAUS
W392
2-TIER SWITCH HARNESS
W199
RESISTIVE TEMPERATURE PROBE
Y101
KEY SWITCH
PWP 320
PUSH BUTTON SWITCH (PRICING)
DS 18
HANDLE LINK UNIT
247KT00
MCIU CONTROL BOX
MC 200D
COMMUNICATOR (HAND HELD)
FIGURE 5 – “RECEIVED MICON” INFO-PAC DISPLAY
