MICON 500C Electronic Sequencing
22
234AY00.INS R06
Computer Installation Guide
6.3.1
TWO TIER OPTION INSTALLATION (CONT’D)
To install the two tier option:
Ø
Connect the push button switch between the blue and orange wires on the provided connector.
The push button switch can then be mounted in a 7/8” hole in the side of the dispenser.
Ø
An optional key-switch is available, which can be used instead of, or together with, the push-button.
Wire the key-switch and push-button in series, not parallel.
6.3.2 SETTING PRICES ON A TWO TIER DISPENSER
(FOR SINGLE TIER PRICE SETTING, GO TO PAGE 19.)
Setting prices on a two tier dispenser is the same as on single tier dispensers except that pressing the
DISCOUNT
button will change which price is being set.
1.
To set “Prc 1”, which is the regular price
, proceed as on page 19 by turning OFF AC
MICON 500C head power at breaker box. Display should be flashing. The dollar display on
the MICON 500C displays the dollar amount and “Prc 1” at first.
Set this price by aiming the communicator’s transmitter (on top of unit) at the optical sensor
(oval hole ) at right of price display on MICON 500C.
Press the SEL key to select the digit to be changed, and press the SET key to increment to
the desired number.
2.
To set “Prc 2”, which is the discounted price
, press the DISCOUNT button located on
the side of the dispenser. The dollar display on the MICON 500C will then display the dollar
amount and “Prc 2” at first. “Prc 2” indicates the discounted price.
Set this price by aiming the communicator at the optical sensor (oval hole ) at right
of price display on MICON 500C. Press the SEL key to select the digit to be changed, and
press the SET key to increment to the desired number.
6.3.3 MAKING DISCOUNT PRICE SALES ON A TWO TIER DISPENSER
1. To make a discount priced sale, simply press the
DISCOUNT
push button, located on the side of
the dispenser, before turning the dispenser handle ON. When the button is pressed, the discount
price will be displayed. The next sale will proceed at the discount price.
Ø
If the DISCOUNT button is pressed by mistake and you do not wish to make a discounted sale,
simply press the DISCOUNT button again and the dispenser will revert back to the regular price.
Ø
Pressing the DISCOUNT button while the dispenser handle is in the ON position has no effect
on the dispenser.)
2. When the discounted sale is completed turn the dispenser handle to the OFF position. The regular
price will again be displayed and subsequent sales will occur at the regular price.
