RMG TME400-VM, Operating Manual

Page: 54 / 137

3 TME400
Manual TME400-VMF · EN07 · December, 7
th
2020
48
3.1.4.
Battery replacement
Note
The coordinate G24 (see chapter 4.3.3.4 Error / type plate ) indicates the re-
maining battery capacity. If the remaining capacity falls below 10 %, a warn-
ing is generated.
In order to replace the battery, unscrew the large screw on the right side of the
electronics with a large screwdriver or a coin.
Figure 9: Position of the battery housing
The meter is rotated in the next figure, showing the rear area in this figure below.
Now, you can pull out the battery holder with battery on a handle.
The battery can be removed vertically in relation to the battery holder by pulling
slightly. When installing the new battery, ensure that the polarity is retained for the
new battery.