RME Audio Digiface AES, User Manual

Page: 64 / 104

64 User's Guide Digiface AES
© RME
24.7 Settings
The dialog Settings can be opened via the
Options menu or directly via F3.
24.7.1 Mixer Page
On the mixer page some typical settings for the mixer operation are set, like Talkback source,
Dim amount when Talkback is active, the stored main volume or the input used for the External
Input function.
Talkback

Input. Selects the input channel of the
Talkback signal (microphone in control
room). Default: None.

Dim. Amount of attenuation of the signals
routed to the Phones in dB.
Listenback

Input. Selects the input channel of the Lis-
tenback signal (microphone in recording
room). Default: None.

Dim. Amount of attenuation of the signals
routed to the Main Out in dB.
Main Out

Recall. User defined listening volume, ac-
tivated by the Recall button at the unit or
in TotalMix.

Dim. Amount of attenuation for the Main
Out in dB.

External Input. Selects the stereo input
that replaces the mix signal on the Main
Out when activated. The volume of the
stereo signal is adjusted by the slider
Gain.
PFL Mode

Live Mode, PFL replaces Solo. PFL
means Pre Fader Listening. This feature
is very useful when operating TotalMix in a live environment, as it allows to quickly listen/mon-
itor any of the inputs by hitting the Solo button. The monitoring happens on the output set for
the Cue signal via the Assign dialog.

Exclusive Solo/PFL Mode. Only a single Solo or PFL can be active at a time. Activating a
different one automatically deactivates the previous one.

2-Row Mode with only Input in first row. The Software Playback channels are shifted to
the lower row, beside the Hardware Outputs.