Using Options 91
2. Using a screwdriver, remove the screw that holds the memory-module
compartment door in place (Figure 24).
Figure 24. Removing the Memory Module Compartment Door
3. Grasp the edge of the door and pull the door off the chassis.
4. Remove installed modules if necessary:
When removing modules, pull on the plastic portion of the
connector slots tabs only. Do not pull on the metal part of the
tabs, or you may damage the tabs.
a. Pull the tabs on the connector slot outward slightly, until the edge of
the memory module pops up (Figure 25).
Figure 25. Removing a Memory Module
b. Hold the memory module by the edges and pull it forward out of the
compartment.
5. Align the connector on the memory module with the connector of the slot.
Socket 1
Socket 2
Tab
Tab
