manualshive.com logo in svg

RM VM7000, User Manual

Share
Download
RM VM7000 User Manual Download Page 35

Using the Battery   35

Figure 16.  Removing the Battery Pack

4. Grasp the tab on the battery and pull the battery out of the compartment.

See ”Installing the Battery” for information on installing the battery.

Installing the Battery

To install the battery pack:

1. With the computer’s power off, close the LCD panel and turn the computer 

over so the bottom of the unit faces up.

2. Slide the battery compartment cover straight up and off the computer(Figure 

17).

Insert the battery into the battery compartment, ensuring the 
correct orientation so that the battery fits in its slot properly. 

3. Slide the battery pack into the compartment. Make sure the battery is fully 

inserted into the compartment.

4. Align the tabs on the battery compartment cover with the slots on the battery 

compartment.

5. Push the cover straight down until it snaps into place.

Summary of Contents for VM7000




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands