Safety reliably produced.
© RLS Wacon analytics GmbH ∙ +49 (0)5121 28126 0 ∙
Subject to
change without notice
26
Electrical installation
Establishing the supply voltage (with junction box):
Work on the electrical equipment of the system/machine may only be carried
out by a trained electrician!
To establish the supply voltage, proceed as follows:
1.
Insert the voltage-free supply line into the junction box
2.
Strip the cable (as well as PE, L and N), use wire end ferrules if necessary.
3.
Connect PE, L and N according to the illustration (marked red).
Note the further wiring to and from the unit switch as well as to the analyser.
Only connect your supply line to the free terminals provided for this purpose.
Establishing the supply voltage (without junction box):
Designation
Colour
L
Brown
N
Blue
Connect the connection cable to your supply voltage in accordance with the applicable
standards and guidelines.
Voltage
Illustration 10: Electrical installation - supply voltage (junction box)
To the switch
To the analyser
From supply
From switch
Summary of Contents for 32-074165
Page 76: ......
