Safety reliably produced.
© RLS Wacon analytics GmbH ∙ +49 (0)5121 28126 0 ∙
Subject to
change without notice
15
Installation
Wall mounting LIMES
The LIMES analyser can be mounted directly. An additional front cover is optionally available for
protection against dirt and dust.
Illustration 1: LIMES - rear and side view (dimensions are in mm)
The unit is attached to a wall or suitable supporting structure using 3 screws (max. Ø 5 mm).
1.
Select a suitable mounting location
2.
First pre-mount a screw (A) on the wall.
3.
Suspend the analyser, align
4.
Finally, fix to the wall from the front with two screws (B).
Do not install the analyser under dripping pipes.
Voltage
Summary of Contents for 32-074165
Page 76: ......
