Safety reliably produced.
© RLS Wacon analytics GmbH ∙ +49 (0)5121 28126 0 ∙
Subject to
change without notice
37
Operation and handling
Measurement of the water sample with reagent
In this step, the value is determined from the colouring of the water sample. For this purpose,
the stirring blade is stopped. The actuator board LED lights up and the evaluation of the water
sample takes place immediately. The result of the measurement is displayed on the LEDs on the
front of the unit.
In case of incorrect values, e.g., missing reagent addition, a device fault is output.
Rinsing and cleaning the measuring chamber
The solenoid valve opens, flushing out the coloured water sample. The measuring chamber
remains filled with pure process water until the next analysis begins.
Summary of Contents for 32-074165
Page 76: ......
