System Alarm Contacts
• Alarms on power failure.
• Alarms when Ethernet Link Down.
• Can be configured to alarm when the system link to a paired Input Sensor is disconnected.
Bottom Panel
The bottom panel contains the power and alarm terminals.
Bottom Panel Features
Rear Panel
The DIN clip for mounting the system is mounted onto the rear panel. Insert a flat head screwdriver into the
release slot at the bottom of the DIN clip and pull down to remove the system from the DIN rail.
!
RESET
PWR2
PWR1
COM
NO
ALARM
NC
Alarm Terminal
Reset Button
3.9”
100mm
2.0”
51mm
Power Terminals 1 & 2
5.0”
127mm
DIN Clip
Release
Slot
Rear Panel Features
Smart Relay
Output
Smart Relay
Output
1
Hook top of
DIN clip first
2
Rotate and
snap into
position
DIN
Rail
DIN
Rail
DIN Rail Mounting
Introduction
8
