4.
Installation
Getting Started
Before starting
• Review the safety information in section
1. Important Information
• Familiarize yourself with the Smart Relay Output as described in section
2. Introduction
• Have a suitable installation environment with the correct source voltage.
Install the Smart Relay Output
• Mount the 8 Channel Relay Output to T-35 DIN rail.
Connect wiring to Relay Output Contact Terminals
• There are 8 pairs of output contact terminals located on the front panel of the 8 Channel Relay Output.
• The pluggable contact terminals may be removed if needed and will accept wire sizes 16~26 AWG.
• Fully seat the terminal block back into the connector socket before operating the system
Relay Output Maximum Ratings
RLH Recommends using a external relay for applications where voltage and amperage exceed the devices
built-in Relays specifications. Exceeding the maximum ratings may lead to premature failure or improper
operation of the Relays.
Connect Ethernet cable
• Attach the Ethernet cable to the RJ-45 Ethernet port located on the front panel of the Smart Relay Output. Verify
the Link indicators are ON to ensure you have connectivity to your network.
Relay Maximum Ratings
115VAC
1.08A
125VA
12VDC
3.00A
36 Watts
24VDC
2.50A
60 Watts
48VDC
1.25A
60 Watts
130VDC
0.46A
60 Watts
220VDC
0.27A
60 Watts
Quick Start Guide
10
