System Link Configuration
System Link Screen
Note:
System Link Configuration settings chart is continued on the next page.
Settings
Description
Enable System
Link
When checked this unit will synchronize with the input device(s) as configured below.
One to Many
(TCP)
When selected the device will use TCP to link up with the paired input device(s).
The current connection status is shown here.
Input
Sensor IP
Enter the address of the output unit you wish to link to.
Enter Value: 0.0.0.0 when being linked with multiple Input sensors.
Port
Enter which port number you wish to use for TCP communication.
Note:
When using multiple inputs units with one output unit make sure none of the
inputs are synchronizing the same input number. This can cause a conflict with the
output device and result with the intended output relay not operating as expected.
Device Configuration
22
