Intended Audience
This manual is intended for use by qualified technology experts and includes references to industry standard
terminology and practices. Every effort has been made to ensure the information in this manual is accurate,
however due to constant product improvement specifications and information contained in this document is
subject to change without notice. For the most up to date information on this product you can visit
www.fiberopticlink.com.
Conventions
Symbols for notes, attention, and caution are used throughout this manual to provide readers with additional
information, advice when special attention is needed, and caution to prevent injury or equipment damage.
Notes: Helpful information to assist in installation or operation.
Attention: information essential to installation or operation.
Caution: Important information that may result in equipment damage or injury if ignored.
General Safety Practices
RLH recommends that installation and service personnel be familiar with the correct handling and use of
electrical and network equipment prior to use. RLH also recommends that installation and service personnel
follow all safety precautions including the use of protective personal equipment as required.
Caution - Severe Shock Hazard
• Always remove source voltage using proper lockout procedures prior to installation and service.
• Never wire any relay outputs with hot (live) connections.
• Remove the terminal block when wiring.
• Check that all equipment has been properly locked out before restarting or configuring the device.
Contents
5
