56
8
Route the new cable’s wires through
the hole in the housing to the right of
the sensor terminal strip and install a
zip tie in the case and around the
cable as shown in this picture but do
not tighten it yet.
9
Connect the cable’s wires to the
sensor terminal strip. See the table
below for the wire colors. Type A wire
colors are shown in the pictures
below. Note that the Type B cable
has two pairs of wires extending from
the cable. Tighten the zip tie to
secure the cable in place.
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Type A
Red
Green
White
Black
Type B
White wire of
white/yellow pair
Yellow wire of
white/yellow pair
White wire of
white/blue pair
Blue wire of
white/blue pair
