7. Working life
54
7.10 List of appropriate drives
There is a list of drives which can be connected to the controller in the table below.
7.10.1 How do I detect the set drive?
The controller is set in the factory to a given drive type.
The drive type is recorded on the data medium (see picture).
The data medium is stuck to every controller.
In this example, the controller is registered on the "Slimlift"
drive (Code: 20).
If you connect the controller to the mains, the drive set in the
controller appears briefly in hand switches with display (e.g.
"20"
).
7.10.2 How do I recognise the software
release?
The configuration plate shows the software (SW) and hard-
ware (HW) releases as well as the drive type.
If you connect the controller to the mains, the software ver-
sion programmed in the controller appears briefly in hand
switches with display (e.g. "2.17").
Indication
Drive
01
not used
20
Slimlift
21
Slimlift EM
30
LZ 60
35
LZ drive unit
40
Powerlift
41
Powerlift med.
42
Powerlift spindle
43
Telescopic Powerlift
44
Powerlift M
50
RK Easylift
61
AlphaColone (qlt...)
