ENGLISH
85
To remove the woodbox it is necessary to extract
the woodbox to limit switch, remove the two
thumbscrews that keep it fixed to the sliding rails.
When the box is free, it can be lifted and extract-
ed. To reinsert the woodbox repeat the operations
in the opposite sense paying attention to insert
correctly the woodbox in the sliding rails.
The regulation of the plinth must be done inside
the woodbox, to access the vain extract the wood-
box as described in paragraph 2.16.
The plinth of the cookers can be regulated in order
to match the space in which the cooker is inserted.
It is possible to adjust the level of the cooker by
operating on the levelling pins that can be regulat-
ed in height. To do this, it is necessary to remove
the woodbox and regulate singularly each pin
placed in the plinth near the corners, so that the
adjustment of the cooker is correct. For the regula-
tion of the pins, use an hex key n.6: once you have
reached the desired height, fix the locknut with a
n.13 key (see picture 21). The pins have an excur-
sion of 50 mm.
2.16
WOODBOX EXTRACTION
2.17
STANDARD PLINTH REGULATION
Picture 20 – Woodbox extraction.
Picture 21 – Regulation of the height of the cooker with hex key through the levelling pins.
0-50
mm
0-50
mm
N. 6
N. 13
