Riso RISO RZ10 Series, User Manual, Page: 78 / 120

76
Setting the Print Conditions
Working with the Printer Driver
2
Stapler
You can activate the stapler built in the sorter connected to your RISO printer
and select the stapling position.
<Open> : The built-in stapler operates as specified on
the control panel of your RISO printer.
OFF : The stapler is not performed.
ON-At Front Corner : Single vertical staple at right-side corner of the
paper tail in the feed direction.
ON-At 2 Points in Center : Dual vertical staple at paper tail corners in the
feed direction.
ON-At Rear Corner : Single vertical staple at left-side corner of the pa-
per tail in the feed direction.
Refer to the user’s guide of the sorter equipped with the stapler for its functions
and operations.
3
Job separator
You can activate the job separator on your RISO printer and select the timing
of separation tape insertion.
<Open> : Follow the present setting of your RISO printer.
OFF : No separation tape inserted.
ON-Between jobs : Insert separation tapes per job.
ON-Between Pages : Insert separation tapes per page.
Refer to the user’s guide of the job separator for its functions and
operations.