Riso HC5500T User Manual Download Page 6

Page: 6 / 66

Before Starting to Use

This section explains precautions you have to observe when using the machine.

Location for Installation

The location for installation is determined based on consultation with the customer at the time of delivery.

Contact your service representative before moving the machine.

Avoid installing the machine in the locations listed below. Failure to observe this precaution may lead to machine failure or
human injury.

• Locations that are subject to sudden temperature change.

• Extremely hot and humid locations or cold and dry locations

• Heated locations or locations to exposed to direct cold air, direct hot air, or direct radiant heat

• Badly ventilated locations

• Dusty locations

• Locations that are subject to frequent vibration

Operation Environment

Install the machine in a location of which the levelness meets the following conditions.
Front to rear: 3 mm (

") or less

Side to side: 3 mm (

") or less

Appropriate environment conditions are shown below.
Temperature range: 15°C - 30°C (59°F to 86°F)
Humidity range: 40% - 70%(noncondensing)

Overall Dimensions

Space for extending the Booklet tray is required.

The dimensions are expressed in mm.

Dimensions of HC full system (mm)

*:The optional touch panel display is not included.

Width

Depth

Height (*)

Remarks

Normal state

2,633

743

1,165

End of Standard Feed Tray to end of Booklet tray

Extended state

2,633

1,278

1,335

For opening/closing Paper Feed Tray on the stand
and ink cover

Summary of Contents for HC5500T



































































Search results

Summary of Contents for HC5500T

Reviews:

Related manuals for HC5500T

Brands by name

Popular brands

Riso HC5500T, User Manual

Search results

Summary of Contents for HC5500T

Reviews:

Related manuals for HC5500T

Brands by name

Popular brands