48
The Trash Box in Punching Unit is Full of Punch Dust
If the trash box in punching unit becomes full of chips (punch dust), printing stops and a message appears in the display of the printer.
Check the message and remove the trash box in punching unit to discard the chips.
!
• When the trash box is removed, be sure to discard all the chips. If chips remain, the box becomes full of chips
before the message indicating replacement is displayed, resulting in failure.
• Be sure to perform this operation while the printer power is on. When the printer is in the Stand-by mode or Sleep
mode, press the Wake-Up Key or Sleep Key on the operation panel to turn on the printer power. If not, the printer
cannot recognize that the trash box in punching unit is emptied.
1
Open the cover.
2
Pull out the trash box in punching unit to
the front side to remove it.
3
Discard all the chips.
Check that no chip remains in the trash box.
4
Return the trash box in punching unit to
its original position.
5
Close the cover.