8
Punching
The punching hole position can be selected.
If HC Finisher A is connected, 2-hole or 3-hole punching can be made. If HC Finisher B is connected, 2-hole or 4-hole punching
can be made.
The initial setting is [OFF].
For the paper size and setting orientation, refer to
#
p.10
"
"
"
"
Paper Types That Can Be Punched
• Paper weight: 46g/m
2
- 157g/m
2
(12-lb bond to 42-lb bond) (up to 220g/m
2
[58.7-lb bond] for cover sheet)
"
"
"
"
Relation to Stapler
The Punching function can be used with the Stapler function. In this case, the selectable punching positions are restricted
according to the setting of the Stapler function.
Punching hole
Paper size and setting orientation that can be used for punching
2 holes (initial set-
ting)
3 holes
4 holes
Setting of Stapler
Punching position
OFF
Left / top / right
Left 2 positions / Left top 1 position
Left
Top 2 positions / Top left 1 position / Top right 1 position Top
Right 2 positions / Right top 1 position
Right