7 - 8
CZ80 / CV860 Rev. .0
CHAPTER 7: PAPER EJECTION SECTION
6. Paper receiving sensor
REMOVAL
) Turn OFF the machine power, and remove following parts.
Paper ejection cover (M3x6 screws; 2 pcs)
Suction unit (M3x6 screws; 2 pcs)
2) Detach the left and right Paper ejection wings. (Thumb screws; each)
3) Unhook the Timing belt from the motor.
4) Remove the Driven shaft assembly.
5) Detach the Suction face cover. (M3x6 screws; 4 pcs)
6) Turn over the Suction unit.
7) Unplug the wire harness connector from the Paper ejection sensor, and remove the sensor by
carefully unhooking the legs.
Paper ejection sensor
Paper ejection sensor
Suction unit top plate
RISO Inc. Technical Services & Support
US.RISO.COM
