12 - 14
CZ180 / CV1860 Rev. 1.0
CHAPTER 12: MASTER MAKING SECTION
Load roller gear
Load roller (lower)
E-ring
11. Load Roller (bottom)
1) Turn OFF the machine power and remove the Rear cover. (M3x8 screws; 5 pcs)
2) Remove the Master removal upper cover. (M3x8; 2 pcs)
3) Remove the Master scanning upper frame cover. (M3x8 screws: 4 pcs)
4) Remove the Scanner unit cover. (M3x8 screws; 4 pcs)
5) Remove the Housing stay-A. (M3x6 screws; 2 pcs)
6) Open the Master making upper unit. By removing the Housing stay-A in the previous step, the
unit will open wider.
7) Remove following parts.
Load pulse motor assembly (3x6 screws; 2 pcs)
Master positioning sensor bracket (M3x6 screw; 1 pc)
Unplug the wire harness connector of the Master end sensor.
Cutter guide assembly (M3x6 screws; 2 pcs)
8) Detach the Load roller gear by removing the mounting screw. (M3x6 screw; 1 pc)
9) Remove the E-rings of the Load roller (bottom) and remove the roller. (6mm dia. E-ring; 2 pcs)
RISO Inc. Technical Services & Support
US.RISO.COM