4 - 7
CZ80 / CV860 Rev. .0
CHAPTER 4: FIRST PAPER FEED
Paper sensor (send)
Guide plate
Paper sensor (receive)
12. Removal of Paper sensor
Removal
) Pull out the Print drum, turn OFF the machine power and remove following parts.
Front cover (M3x8 screws; 6 pcs)
Rear cover (M3x8 screws; 5 pcs)
Master removal lower cover (M3x8 screws; 4 pcs)
[Slide the Paper feed pressure lever to the center position and push down the
Master removal box lever down in removing the Master removal lower cover.]
Paper feed tray unit
Paper feed clutch
Pickup roller shaft assembly
Elevator motor unit
Guide plate
2) Unplug the wire harness connector of the Paper sensor from the Guide plate.
3) Detach the Guide plate upper assembly from the Guide plate. (3x6 screws; 2 pcs)
4) Remove the Paper sensor mounting cover (upper) from the Guide plate. (3x6 screws; pc)
5) Remove the Paper sensor (receive).
6) Remove the Paper sensor mounting cover (lower) from the Guide plate. (3x6 screws; pc)
7) Detach the Paper sensor (send).
Precaution in Assembly
) Hook the Paper sensor on the hook plate of the Guide plate.
Adjustment after the assembly
) Perform the Paper sensor sensitivity automatic adjustment.
RISO Inc. Technical Services & Support
US.RISO.COM
