13 - 18
CZ180 / CV1860 Rev. 1.0
CHAPTER 13: PANEL MESSAGE
Error Type
C01 [Replace ink cartridge]
Description
C01-xxx
No Ink
Replace Ink Cartridge
To reset dis-
play
Remove the empty ink cartridge and replace with a new one.
Error Point
Error Conditions
512
The ink sensor did not go ON even when inking was performed for a preset duration. (No ink de-
tected.)
563
Ink remaining amount is zero from the information on the RF-Tag.
574
Inkless error was detected 5 times consecutively on one same ink cartridge.
Error Type
C02 [Replace master roll]
Description
C02-xxx
No Master
Replace Master Roll
To reset
display
Remove the empty master roll and replace with a new one.
Error Point
Error Conditions
200
The master end was detected twice in succession at 10-milliseconds intervals during master
transport. (Master material is fully used from the master roll.)
240
Master remaining amount is zero from the RF-Tag information.
253
Masterless error was detected twice consecutively on one same master-roll.
Error Type
C03 [Master disposal box full]
Description
C03-xxx
Master Disposal Box is Full
Empty Master Disposal Box
To reset
display
Remove master disposal box from the machine, throw away the disposed master from the disposal
box and return the disposal box in the machine after an interval of over 5 seconds.
Error Point
Error Conditions
308
Master FULL sensor never went ON during the master compress action. (Mater disposal box full.)
311
The master disposal software counter counted 30 disposed masters. (Master disposal box full by
the software count.)
Error Type
C04 [No paper on the Standard paper Feed Tray]
Description
C04-xxx
Add Paper
To reset
display
Add paper on the standard paper feed tray.
Error Point
Error Conditions
402
Paper detection sensor is OFF (not detecting paper).
4) Consumable Errors (Cxx)
RISO Inc. Technical Services & Support
US.RISO.COM