manualshive.com logo in svg

Rion NL-42A, Instruction Manual, Page: 80 / 154

Share
Download
Rion NL-42A Instruction Manual Download Page 80

62

Reading the Display

Measure

This screen sets the correction of the measurement etc.

Use the 

 keys to select [Measure] and press the MENU/ENTER 

key. The measurement setting screen appears.

Each item of the measurement setting screen is selected using the 

 key.

Pressing the DISPLAY key displays explanation screen of the item that has 

been selected.

Pressing the PAUSE/CONT key switches back to the menu list screen.

Pressing the START/STOP key switches back to the measurement screen.

Frequency Weighting (Main)

Displays the screen to select the frequency weighting characteristics for 

the main channel.

Select [Frequency Weighting (Main)] and press the MENU/ENTER key. 

The frequency weighting screen appears.

Use the 

 keys to select the frequency weighting characteristics (A, C, 

Z) and press the MENU/ENTER key. The same can be performed using 

the touch panel on the menu list screen.

Summary of Contents for NL-42A



























































































































































Reviews:

No comments