Rion NL-42A, Instruction Manual, Page: 131 / 154

113
Setup Files
Resume function
When power to the unit is turned on, the measurement screen appears. The
settings active at this point are the same as were selected before the unit was
last turned off (resume function).
Note
When the unit is started while a start up fi le exists in
the internal memory and SD memory card, the start
up fi le load function (see the following description)
will be executed fi rst.
Loading a start up fi le at startup
If a start up fi le exists both in the internal memory of the unit and on the in-
serted SD memory card, a selection screen such as shown at bottom left will
appear. Select [Internal Memory] or [SD] to load the respective startup fi le.
Selecting [Cancel] at the screen will cause the resume function to re-establish
the same settings as before the last time the unit was turned off. If a startup
fi le exists either in the internal memory of the unit or on the inserted SD
memory card, a selection screen such as shown at bottom right will appear.
(The example is for a startup fi le in the internal memory.)
Selecting [Yes] at the screen will load the start up fi le.
Selecting [No] at the screen will cause the resume function to re-establish
the same settings as before the last time the unit was turned off.