manualshive.com logo in svg

Rion NL-42A, Instruction Manual, Page: 122 / 154

Share
Download
Rion NL-42A Instruction Manual Download Page 122

104

Store Operation

Formatting an SD memory card

Important

Never format optional program cards such as 
the NX-42EX and NX-42WR with SD memory 
card formatting software (such as SD Formatter, 
etc.). Otherwise the program data on the card 
will be erased and the respective functions can 
no longer be used.
Restoration of the erased program is not war-
ranted.

Note

When an SD memory card is formatted (initialized), 
all data present on the card will be lost.

In the following cases, you should format the SD memory card:

•  When using the SD memory card in the NL-42A/NL-52A for the fi rst 

time

•  When wishing to delete all data from the SD memory card

To format an SD memory card, proceed as follows.

1.  Select [Card Format] on the [SYSTEM (Language)] screen and press 

the MENU/ENTER key.

2. The confi rmation screen appears. Press the MENU/ENTER key.

Note

When formatting the SD memory card in a computer, 
select FAT or FAT32 as fi le system.

Summary of Contents for NL-42A



























































































































































Reviews:

No comments