Rion NL-42A, Instruction Manual, Page: 119 / 154

101
Store Operation
Note
Relationship between elapsed measurement time
and number of data
When using Timer Auto mode and 100-ms sampling,
10 data sets are stored per second. Therefore, when
10 seconds of measurement time have elapsed, the
number of stored data is 100 (10 when using 1-second
sampling).
During Timer Auto mode, the pause function cannot
be used.
During Timer Auto mode, the address indication is
based on number of
L
eq
calculation. The number of
L
eq
calculation is not displayed when
L
eq
calculation
interval is OFF.
Marker
Same procedure as for Auto mode (see page 95).
Recalling stored data
Same procedure as for Auto mode (see page 96).
Deleting stored data
Same procedure as for Auto mode (see page 96).