Rion NL-42A, Instruction Manual, Page: 60 / 154

42
Reading the Display
SD memory card remaining capacity
Shows the remaining capacity of an inserted SD memory card.
Delay time
Shows the delayed measurement time set by “Delay Time” (see page 75).
Operation/measurement elapsed time
Shows the elapsed time from the start of measurement.
Address
Shows the current memory address. In manual store mode, the indication
is red if there are data in that address.
Measurement time / Total measurement time
When the store mode is Manual, the measurement time is displayed (see
page 89).
When the store mode is Auto, the total measurement time is displayed
(see page 93).
Store mode
Shows the selected mode for storing data in memory (Manual, Auto, or
Timer Auto) (see page 85).
Note
When the optional Extended Function Program
NX-42EX is not installed, the Auto and Timer Auto
cannot be selected.
L
eq
calculation interval
When the store mode is Auto or Timer Auto, the
L
eq
calculation interval
is displayed (see pages 93, 98).
L
p
store interval
When the store mode is Auto or Timer Auto, the
L
p
store interval is
displayed. (see pages 93, 98)
Comparator
When the comparator function has been set to ON, the comparator level
is shown as an orange line on the bar graph. When a signal exceeds that
level, the indication [Comp] appears, and a signal is output from the I/O
connector on the bottom panel (see page 33).
Note
When the optional Extended Function Program NX-
42EX is not installed, the comparator cannot be selected.