Rion NL-42A Instruction Manual Download Page 32 | Manualshive

Page: 32 / 154

Rion NL-42A Instruction Manual Download Page 32

14

Preparations

Power on/off

To turn the unit on

Hold down the POWER key until the power-on screen appears (at least 1 second).

When the screen is shown, release the POWER key. After the unit has been

started, the measurement screen appears.

During start up, the indicator LED fl ashes red

blue

red

...

POWER key

Indicator LED

To turn the unit off

Hold down the POWER key until the unit is turned off (several seconds).

When the power-off screen appears, release the POWER key.

Important

Remove the batteries from the unit if it is to be
stored for a long time with the POWER key set
to OFF to prevent possible damage caused by
battery leakage, and disconnect the AC adapter
or battery pack.

Note

After turning the unit off, wait at least 10 seconds
before turning it on again.

If the key lock has been activated, pressing the
POWER key has no effect. Press the key and
key simultaneously to cancel the key lock condition,
and then press the POWER key.

«
...
30
31
32
33
34
...
»

Summary of Contents for NL-42A



























































































































































Reviews:

No comments