Rinnai Tankless Water Heater Installation and Operation Manual
29
1. Direct Vent
(Concentric Pipe and Twin Pipe)
Direct Vent Approved Vent Manufacturers and Products
Following is a list of vent components and terminations for Direct Vent installations. Install the correct
venting for your model according to the venting manufacturer’s instructions and the guidelines below. The
information below is correct at time of publication and is subject to change without notice. Contact the
vent manufacturer for questions related to the vent system, products, part numbers and instructions.
Manufacturer
Phone
Web Site
Ubbink
800-621-9419
www.rinnai.us
Centrotherm
877-434-3432
www.centrotherm.us.com
Heat-Fab
800-772-0739
www.heatfab.com
Metal Fab
800-835-2830
www.metal-fabinc.com
IPEX
U.S.: 800-463-9572
Canada: 866-473-9462
www.ipexamerica.com
www.ipexinc.com
DuraVent
800-835-4429
www.duravent.com
Royal
800-232-5690
www.royalbuildingproducts.com
Ecco Manufacturing
877-955-4805
www.eccomfg.com
DiversiTech
800-995-2222
www.diversitech.com
Manufacturer
Manufacturer
Part number
Product
Description
Diagram
Horizontal
Vertical
Equivalent
Length (ft)
2 in. /4 in. CONCENTRIC VENT TERMINATIONS
UBBINK
US/Canada
229031/229012NPP
229032/229013NPP
2/4 Condensing Horizontal Termination Kit 12 in.
2/4 Condensing Horizontal Termination Kit 21 in.
5
224359/224356NPP 2/4 Condensing Roof Discharge Termination 20
in. above roof
5
710202NPP
2/4 Condensing 90 Degree Diverter Nose
(Use
with Wall Terminal)
5
710215NPP
2/4 Condensing 45 Degree Diverter Nose
(Use
with Wall Terminal)
5
IPEX
1906005, 197040
FGV Concentric Vent Kit (16 in. length)
20
1906005PVC
(Order from Rinnai)
196105, 197033
FGV Concentric Vent Kit (28 in. length)
20
196105PVC
(Order from Rinnai)
196125
FGV Concentric Vent Kit (40 in. length)
20
196125PVC
(Order from Rinnai)
Table 7: Approved Vent Manufacturers
Table 8: Approved Vent Products