
Rinnai 7 ES_FIM
FLUE TRANSITION CONNECTIONS
A
Flue exhaust connection to heater.
B
Combustion air inlet connection to heater (Right hand ~ Small connection
for models 308, 309, 556, 557, 559, 561 heaters. Left hand ~ Large connection for model 1004 & 1005 heaters).
C
Rubber combustion air inlet cap (when fitted) is designed to fit both the large and small combustion air inlet and
MUST
cover the air inlet not in use.
D
Combustion air inlet.
E
Exhaust outlet.
LOCATION
This appliance is
NOT
suitable for
inbuilt installations.
This appliance
MUST NOT
be
installed where curtains or other
combustible materials could come into
contact with it. In some cases curtains
may need restraining.
Heat emanating from the front of this
appliance may over time affect the
appearance of some materials used
for flooring such as carpet, vinyl, cork
or timber. This effect may be amplified
if the air in the room contains cooking
vapours or cigarette smoke. To avoid
this possibility, it is recommended
that a mat be placed in front of the
appliance, extending at least 750mm
in front of it.
The flue terminal
MUST BE
positioned away from flammable materials.
In areas subject to heavy snowfall, keep snow clear of flue terminal at all times.
DO NOT
flue into natural draught flues or fireplaces.
DO NOT
flue into other rooms, roof spaces or into under floor spaces.
DO NOT
Install the heater in an unusually dusty area.
IMPORTANT
For other important information regarding the location of the heater refer to the instructions
supplied with the appliance.
LUBRICATING COMPONENTS
The inner flue pipe joints are sealed with an “O” ring seal.
To help ensure a good seal and to ease assembly, a small tub of silicone grease is provided with the Direct Flue
Kit (ESDFK) and the In-Wall Transition Kit (ESKIT03). Use this silicone grease to lubricate the “O” ring on the inner
pipes prior to assembly.
CAUTION
Use
ONLY
a silicone based "O" ring seal lubricant.
DO NOT
use petroleum based lubricants such as petroleum jelly, as such products may cause
deterioration.
B
A
C
A
C
E
D
C
A
D
B
E
B
E
D
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
WARNINGS & IMPORTANT INFORMATION
Summary of Contents for ENERGYSAVER RHFE-308FTR
Page 31: ...Rinnai 31 ES_FIM NOTES ...