background image

For more information visit 

rimage.com/support

2004849_A

2

Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without 

prior notice. Rimage Corporation reserves the right to revise this publication  and to make changes from time to time in the content hereof 

without obligation of Rimage Corporation to notify any person or organization of such revisions or changes.
This document may contain links to web

 

sites that were current at the time of publication, but may have moved or become inactive since. This 

document may contain links to sites on the Internet that are owned and operated by third parties. Rimage Corporation is not responsible for the 

content of any such third-party site.
© 20

20

, Rimage Corporation

Rimage® is a registered trademark of the Rimage Corporation. Professional™ and Everest™ are trademarks of the Rimage Corporation. Windows® 

is a registered trademark of Microsoft Corporation.
All other trademarks and registered trademarks are the property of their respective owners.
The most recent version of this document can be found at 

rimage.com/support

.

Rimage Corporation

201 General Mills Boulevard North

 

Golden Valley

, Minnesota 55439, USA

Toll Free +1.800.445.8288

Rimage Europe GmbH

Wernher-von-Braun Straße 9

63303 Dreieich-Offenthal, 

GERMANY
Tel +49 (0)6074.8521.0

Rimage Japan Co., Ltd.

4F Arai #38 Bldg.,  

2-7-1 Hamamatsu-cho,

Minato-ku, Tokyo 105-0013 JAPAN
Tel +81.3.6452.8780  

Rimage Taiwan

2F.-7, No. 508, Sec. 5,

Zhongxiao East Road., Xinyi Dist.,

 

Taipei City 110, TAIWAN
Tel +886.2.2726.0100

Rimage Information 

Technology (Shanghai) 

Co., Ltd.

RM # 206, 207, 2F 

No.1 FuXing Zhong Road 

HuangPu District

Shanghai, 200025 CHINA
Tel +86.021.5887.8905

Summary of Contents for Professional 2450






















Reviews: