Rimage Professional 2450, User Manual

Page: 17 / 21

1 7
Filter Maint e n a nce
For more information visit rimage.com/support
2004849_A
1. Remove the filters from the vents by squeezing the long edges of the
filter casings and pulling outward.
2. Remove the filter sponges from the filter casing s .
3. Rinse both sides of each sponge under cold tap water until the water
runs through it clearly.
4. Gently ring out the water until no droplets are visible in the mesh of the
sponges , being cautious not to stretch out or tear the material.
5. Put the sponges back into the filter casing.
6. Reinstall the filters by again squeezing the long edges of the filter holder
until the filters are securely fixed to the case vent s . See the image to the
right for correct placement.
1 7 . 1 : Cleaning the Filters
Your filters should be cleaned with water when you can see that they have
accumulated a layer of dust . Please follow these steps to do so:
Filter Casing
Filter Sponge
Tip: If your filters become worn or damaged, contact Rimage
Support for replacements.