5. How to Set Display Mode
5-2. Concentration displayed gas reading setting (base)
- 31 -
5-2. Concentration displayed gas reading setting
(base)
The concentration display of the gas detector depends on the specification; however, a pre-registered gas
can be read instead to display its concentration.
LCD display
1
Press the ENTER
button.
The gas detector enters the
base gas setting mode.
▼
2
Select a base gas
name with the
▼/▲
button and then
press the ENTER
button.
The gas detector enters the
gas reading setting mode.
The currently set base gas
(N2) is displayed first.
▼
* For the calibration gases
that cannot be read, the
gas reading setting mode
will not be entered.
▼
* Press the DISPLAY button to
cancel the operation.