4. How to Use
4-4. Basic operating procedures
- 20 -
4-4. Basic operating procedures
The detection mode is used after power-on.
NOTE
•
Of the fault alarms, only the low flow rate alarm "FAIL - LOW FLOW" can be reset by pressing the
RESET button after removing the cause of low flow rate. For other fault alarms, turn off the power
and then promptly contact RIKEN KEIKI.
•
The backlight goes off after 30 seconds or so of no operation. It lights up continuously while an
alarm is activated.
<Display Mode>
Operate AIR button
Operate DISPLAY button
Operate RESET button
*For alarms other than
"FAIL - LOW FLOW"
and "FAIL - CLOCK",
turn off the power and
contact RIKEN KEIKI
for repair.
Operate
▼
and DISPLAY buttons
<Snap Logger Mode>
<Detection Mode>
LCD Display
<Calibration Mode>
<Gas Alarm>
<Fault Alarm>
<
>
Operate
▼
and
▲
buttons
