4
3. MENU NAVIGATION
Your stove is equipped with a state-of-the-art control system. You
can control all functions on the intuitive touch display. The surface
of the touch display responds to both finger pressure and touch pen.
Note
Do not use sharp-pointed objects to operate the appliance so as to
prevent damaging the surface of the touch display.
Navigation
The complete controls of your appliance include 4 main menu levels:
HOME
Controls: Unit start (stop, regulation of heating power /
set ambient temperature, display of current stove state,
active info
OPERATING MODES
Range: Manual mode, automatic mode and comfort
mode
SETTINGS
Setting: Heating times, Multi-air, frost protection, RIKA
room sensor, ...
INFO
Display: flame temperature, total operating hours, total
ignitions, software version,...
Standard functions
Each stove model provides the following standard functions:
Decreases the
heating output
Increases the
heating output
Off
Start / Standby
Note
To avoid involuntary starting or switching off, either button must be
depressed for 2 seconds.
Note
If your stove is shut off during the operating states
IGNITION
or
INITIAL PHASE
, the display will switch to
BURN-OFF
only after a
few minutes.
Cleaning function
In addition to the standard functions, stove models with an automatic
grid dispose of a cleaning function.
Grid turning into
cleaning position
Show additional
functions
Note
Turning of the grid is only possible during the operating state
STOVE OFF
at a firebox temperature below 80°C!
