background image

8

6. INFO

In  the  main  menu  INFO  you  can  retrieve  the  most  important 
parameters.

Parameters

Info

Input

Output

Su 16.10.2016

15:55

Inputs

Flame temperature 

[°C]

Current firebox temperature

Room temperature 

[°C]

ACTUAL temperature in the room

only with RIKA roomsensor

Ext. Request

External request enabled (ON) or disabled (OFF)

Pressure switch

Sufficient low pressure in the firebox to ensure operation (ON),  

or insufficient (OFF) 

Grid contact

Grid in heating position (ON) or other position (OFF)

Outputs

Discharge motor [‰]

Actual speed (0 - 1000)

Discharge motor current

Actual current consumption (0 - 120)

Flue gas fan 

[1/s]

Actual speed (0 - 2500)

Insertion motor 

[‰]

Actual speed (0 - 1000)

Insertion motor current

Actual current consumption (0 - 120)

Air flaps

Current position (0 - 1000)

Grid motor 

Actuated (ON) or in rest (OFF)

Multi Air fan

Actuated (ON) or in rest (OFF)

Multi Air fan 2

Actuated (ON) or in rest (OFF)

Ignition element

Actuated (ON) or in rest (OFF)

Parameters

Operat. hours pellets

Total operating hours in pellet mode (0 - 99999)

Feed rate total 

[kg]

Total pellet feed volume (0 - 99999)

Kg till cleaning

Remaining pellets feed volume until next cleaning (1500 - 0)

Operat. h. split logs

Total operating hours in split log mode (0 - 99999)

Ignition counter

Total ignitions (0 - 99999)

ON/OFF cycles

Number of power failures

Main State

Main operating regulation state

Sub State

Secondary operating regulation state

Stove type

Name of appliance

Software stove

Software version stove control

Software display

Software version touch display

Summary of Contents for V2.23















Reviews: