background image

|7

EN

6

5. SETTINGS

The  main  menu  SETTINGS  is  provided  to  set,  among  others,  the 
heating times, Multi Air blower, frost protection etc.

Heating times

Using  the  heating  times  program  you  can  operate  your  stove 
according  to  the  heating  schedule.  Activating  heating  times  (ON) 
gives access to setback temperature (only with RIKA room sensor), 
and the heating times program. 

Set Heating Times

Heating Times

Set Back Temp

Heating Times

ON

14

15:55

Tu 17.10.2017

In  the  heating  times  program,  single  weekdays,  or  a  couple  of 
weekdays can be marked simultaneously (highlighted in 

ORANGE

). 

Upon selecting heating time I or heating time II you can enter the ON 
and OFF times you require for the marked weekdays.

Weekdays that have already been programmed are highlighted in 

GREEN

 when re-accessing the heating times program. 

Heating Time II

Heating Time I

Set Heating Times

ON

OFF

##:## ##:##

Mo

Tu

We

Fr

Th

Sa

Su

20:15 21:45

15:55

Su 16.10.2016

Tip

As  soon  as  a  weekday  is  marked,  the  saved  heating  times  are 
displayed.

If  a  number  of  weekdays  are  marked,  only  the  identical  heating 
times  are  displayed.  If  the  heating  times  differ  from  each  other, 
hash keys (##:##) are displayed.

Tip

If your stove does not start up although heating times have been 
saved, please check if they are enabled (ON) and if your stove is in 

STANDBY

 operating state.

Multi Air fan

Enabling the Multi Air fan (ON) you get access to fan speed and fan 
adaptation.

Fan level

The  volume  of  convection  air  is  adjustable  from  AUTO  (adapts 
automatically according to heating power), over to Level 1 (min) and 
level 5 (max).

Fan area

In addition, it is possible to adapt the Multi Air fan speed (AUTO, level 
1 to level 5) /- 30% of fan speed.

Frost protection

Only  possible  if  a  roomsensor  is  connected.  If  this  function  is 
enabled (ON) and if the room temperature drops below the set value  
(0°C - 10°C), your stove will start working.

This applies also outside the heating times and in operating state 

STOVE OFF

.

RIKA room sensor

For  more  information  on  this  option,  please  consult  the  operating 
instructions room sensor / RIKA radio room sensor. If there is a room 
sensor built in you get access to temperture adjustment and power 
requirement.

Temperture adjustment

It is possible to adjust the temperature shown in the infomenu.

Power requirement

(factory setting 3) The heating power is adjustable from level 1 (for 
small rooms) to level 4 (for big rooms).

RIKA firenet

For  more  information  on  this  option,  please  consult  the  operating 
instructions RIKA firenet.

GSM

For  more  information  on  this  option,  please  consult  the  operating 
instructions RIKA GSM Control.

Screen Saver

Sets the time interval (OFF, from 1 min to 30 min) for activating the 
screen saver.

Child lock

If this function is enabled (ON), a 4-digit code can be saved. Now, the 
screen saver may only be disabled by entering the saved code.

Date/time

Sets date and time.

Language

Selects the desired language.

Resets

Kg till cleaning

Resets  the  supply  rate  to  700  -  1500  kg  after  a  service  has  been 
carried out. 

Factory setting

Resets all stove settings to the factory setting. 

Note

This reset may only be performed if the stove temperature is below 
80°C! 

Logging

Only for service technicians.

Service

Only for service technicians.

Summary of Contents for V2.23















Reviews: