Set the Event Table Format
In the Decode menu, click or tap the drop-down button of Format to select the
display format of "Data" in the event table. The available options include "Hex",
"Dec", "Bin", or "ASCII".
Interpret the Decoded CAN Data
•
Frame ID: expressed in Hex, identified as "ID:".
•
DLC (Data Length Code): expressed in Hex, identified as "DLC:".
•
Data: Its display format is the same as that of the bus data (Hex, Dec, Bin, or
ASCII), identified as "Data:".
•
CRC (Cyclic Redundancy Check): expressed in Hex, identified as "CRC:".
•
ACK (Acknowledgement): identified as "ACK". When errors (ACK is detected to
be 1) occur, displayed as a red patch.
•
R (remote frame): identified as "R:".
•
Stuff (Bit filling error): identified as "Stuff".
Protocol Decoding
HDO1000 User Guide
194
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
