Rigol DS1000E Series, DS1000D Series Programming Manual Download Page 84

Page: 84 / 135

RIGOL

Command Systems

Programming Guide for DS1000E, DS1000D Series

2-72

:DIGital<n>:POSition?

Function Explanation:

The commands set and query the waveform display position of specified channel.
<n> could be 0

～

15.

When  choose  Big-waveform,  up  to  8  waveforms  could  be  displayed  on  the
screen, and the range of <position> is 0~7;
when choose Small-waveform, up to 16 waveforms could be displayed on the
screen, and the range of <position> is 0~15.

Returned Format:

The query returns the setting value of <position>.

Example:

:DIG2:POS

Setup the waveform of digital channel2 displays at the
position of D3.

:DIG2:POS

？

The query returns 3.

:LA:THReshold

Command Format:

:LA:THReshold<value>[suffix]
:LA:THReshold?

Function Explanation:

The commands set and query the type of threshold of digital channel. <value>
could be TTL, CMOS, ECL or User (User-defined, the range is -8.00

～

+8.00).

suffix could be V or mV, the minimum interval is 10mV.

Example:

:LA:THR

COMS

Setup the type of threshold as COMS.

:LA:THR?

The query returns COMS.

:LA:POSition:RESet

Command Format:

:LA:POSition:RESet

Summary of Contents for DS1000E Series, DS1000D Series








































































































































Search results

Summary of Contents for DS1000E Series, DS1000D Series

Reviews:

Related manuals for DS1000E Series, DS1000D Series

Brands by name

Popular brands

Rigol DS1000E Series, DS1000D Series, Programming Manual

Search results

Summary of Contents for DS1000E Series, DS1000D Series

Reviews:

Related manuals for DS1000E Series, DS1000D Series

Brands by name

Popular brands