Rigol DS1000E Series, DS1000D Series Programming Manual Download Page 85

Page: 85 / 135

Command Systems

RIGOL

Programming Guide for DS1000E, DS1000D Series

2-73

Function Explanation:

The command resets the waveform display position, that is to get the jumbled
waves on the screen return to normal.

:LA:GROUp

Command Format:

:LA:GROUp<n>

{ON|OFF}

:LA:GROUp<n>?

Function Explanation:

The commands set and query the On/Off state of GROUp1 (D7~D0) and
GROUp2 (D15~D8). <n> could be 1 or 2.

Returned Format:

The query returns ON or OFF.

Example:

:LA:GROU1

ON Turn on the group D7~D0.

:LA:GROU1?

The query returns ON.

:LA:GROUp<n>:SIZe

Command Format:

:LA:GROUp<n>:SIZe <size>
:LA:GROUp<n>:SIZe?

Function Explanation:

The commands set and query the waveform size from group. <n> could be 1 or
2. <size> could be Small or Big, which represents to display 16 channels or 8
channels.

Returned Format:

The query returns SMALL or BIG.

Example:

:LA:GROU1:SIZ S Setup the waveform size from GROUp1 as Small.

Summary of Contents for DS1000E Series, DS1000D Series








































































































































Search results

Summary of Contents for DS1000E Series, DS1000D Series

Reviews:

Related manuals for DS1000E Series, DS1000D Series

Brands by name

Popular brands

Rigol DS1000E Series, DS1000D Series, Programming Manual

Search results

Summary of Contents for DS1000E Series, DS1000D Series

Reviews:

Related manuals for DS1000E Series, DS1000D Series

Brands by name

Popular brands