Rigol DS1000E Series, DS1000D Series Programming Manual Download Page 25

Page: 25 / 135

Command Systems

RIGOL

Programming Guide for DS1000E, DS1000D Series

2-13

:DISPlay:MNUStaus?

Function Explanation:

The commands set and query the state of the operation menu.

Returned Format:

The query returns ON or OFF.

Example:

:DISP:MNUS

ON Open menu for current operation.

:DISP:MNUS?

The query returns ON

:DISPlay:CLEar

Command Format:

:DISPlay:CLEar

Function Explanation:

The command clears out of date waveforms on the screen during waveform
persist.

:DISPlay:BRIGhtness

Command Format:

:DISPlay:BRIGhtness

:DISPlay:BRIGhtness?

Function Explanation:

The commands set and query the brightness of the grid. The range of <ncount>
is from 0 to 32 (from dark to bright).

Returned Format:

The query returns the setting value of <ncount>.

Example:

:DISP:BRIG 10 Setup the grid brightness as 10.
:DISP:BRIG?

The query returns 10.

Summary of Contents for DS1000E Series, DS1000D Series








































































































































Search results

Summary of Contents for DS1000E Series, DS1000D Series

Reviews:

Related manuals for DS1000E Series, DS1000D Series

Brands by name

Popular brands

Rigol DS1000E Series, DS1000D Series, Programming Manual

Search results

Summary of Contents for DS1000E Series, DS1000D Series

Reviews:

Related manuals for DS1000E Series, DS1000D Series

Brands by name

Popular brands