RigMaster LG200 Installation Manual
Section 11
August 2010 RigMaster Power International Ltd LG200 Service Manual
Controls
The Cabin Controller consists of two sections:
1. LCD (Liquid Crystal Display) with basic control buttons.
2. Advanced control buttons
The LCD and basic control buttons are always visible to the user. The advanced
control buttons are concealed behind semi-circular cover.
The controller also contains a LED indicator. When the LED is green, the system
is active, if it glows red then the system is detecting a problem and an error message
will scroll across the bottom of the LCD screen. The LED is turned off in low power
mode.
1. Basic Controls and Functions
Basic controls contain the following buttons:
1. Start system
2. Stop system
3. Up arrow (Red triangular button)
4. Down arrow (Blue triangular button)
If the unit is in advanced mode, pressing any of the basic control buttons will
return the unit to basic mode. Alternately, the control panel will return to basic
mode after two minutes of inactivity.
If the unit shows the current temperature, pressing either the up or down button
will show the set point temperature without changing it. Once the set point is
indicated, pressing up or down buttons will adjust the set point. The new set
point takes effect only when display is returned to show internal temperature.
2. Advanced Controls and Functions
The advanced controls are as follows:
1. Power
button controls whether the module is active. In inactive mode all
system functions including engine start, climate control and AutoStart are
disabled. You can still see the temperature reading, current time and use
the alarm clock function.
2. Fan
button is used to change fan setting. Pressing the button cycles
between auto, high, med, low and off settings.
3. Clear
button takes you back to main screen without saving any information.
4. Clock
button is used to set the time/date/day menu features.
5. Alarm
button is used to set the alarm menu features.
6. AutoStart
button is used to access and set AutoStart menu features.
7. Mode
button is used to activate the different operational modes. Pressing
the mode button will back you out of a menu mode, but does not save the
information just entered.
8. Ext. Temp
button will display the external temperature on the LCD when
pressed
