Rightest GM250S, User Manual

Page: 9 / 40

17
16
®
Your Rightest GM250S Blood Glucose Meter comes with one CR2032, 3volt, battery installed. One new battery will
provide power to perform about 1000 tests under normal use. You can press the main button or insert a strip to activate
your meter.
1. Turn the
Glucose Meter over. Press and push
battery cover to open.
®
Rightest GM250S Blood
PRECAUTION
- Please follow the local regulation and discard a used battery properly.
®
4. The Rightest GM250S Blood Glucose Meter performs a self test.
5. Press any button to exit the self-test and enter Setting Mode.
6. Set the time and date when the batteries are replaced. See Chapter "Setting up your meter - setting the time, volume
and date". Test results are still stored in the memory.
3. Slide the battery cover back
until it snaps into place.
2. Install the battery. Be sure to put
battery in correct direction.
Meter activation and Battery change Meter activation and Battery change